Month: February 2017

Why China Zinc Die Casting is Beneficial?

aluminium-die-casting

Often most engineers focus very much on the weight of the material when designing components and parts and that’s why zinc is overlooked as it is lightweight. However, there is a huge demand for lighter parts, especially in automotive and gadget industries and to accomplish the task for these industries, engineers choose either aluminium or magnesium for manufacturing parts and components though zinc is more economical. So, if you look on the above parameters, then zinc has no place in the lightweight applications, but if you focus on the overall China zinc die casting process, then zinc could emerge as one of the most favorable alloys for building parts. So now let’s see what are some of the benefits which China zinc die casting can give for manufacturers.

Ability to Cast

No doubt that manufacturers would love if they could feel the fluidity of the zinc alloy. The point that needs to be understood is that as zinc provides greater fluidity, die castings can be thinner, more complex and don’t require any secondary operations which are usually demanded by aluminium and magnesium alloys. The manufacturers could achieve savings as less material is used and also can save a lot of energy which, when otherwise be wasted in melting and recycling.

Less Cycle Time

When the China zinc die casting process takes place, the molten metal is injected into the die for the creation of the part. After the metal gets solidifies, the part is ejected from the tool. Now determining the cooling time in the tool is generally varies according to the alloy and the size of the part. Now the point is how zinc alloys help in achieving less cycle time? Well! Zinc uses the hot chamber die casting that produces four or five shots per minute, whereas other alloys give two or three shots. If you are cautious of having a low cost, then having less cycle time can aid in gaining more savings and this can be achieved from zinc.

Other Properties

China zinc die casting manufacture more strong and sturdy parts and components as the standard zinc alloy help in achieving the highest quality of parts and that too at room temperature. The die casting process is also found to be more in strength as the zinc alloy is inherently having a strength and doesn’t require any secondary aid in comparison to other alloys. Besides this, you can save on much on the overall cost of the part through this process.

To know more,visit: http://www.china-casting.biz

Advertisements

How To Design Plastic Part through Plastic Injection Molding China

injection-molding.jpg

The Plastic injection molding China offers versatile solutions for manufacturing variety of applications. It also helps in producing high quality parts at low cost. This process is surely far better and beneficial in comparison to other molding processes, but the success of any part depends upon its design. The design can affect a lot in consistency and efficiency and poor design can be more costly and time-consuming. So let’s just discuss few design elements that should be taken into account while applying plastic injection molding China process to achieve quality and precision of the parts.

Thickness of Wall

Now you have the flexibility of reducing injection molded part defects by laying out a smart and well designed wall thickness design. Keep in mind that the thickness of all walls should remain uniform as molten plastic will try to come out of the path of the larger walls leaving the smaller wall areas unfilled. So a thoughtful design layout will play a great role in achieving the accurate and refined injected molded parts.

Corner Transitions

When you are doing high volume production with plastic injection molding China process, the plastic parts having extreme features can become susceptible to defects as molten plastic always flows from the path that offers the least resistance to it and harsh and sharp angles can prevent the molten plastic to move. So, it is very important to keep all corners curved and therefore it is recommended to have smooth corner transitions for better plastic flow.

Weld Lines

These weld lines occur when two sections of a single flow meet. They occur mostly around holes or any other type of obstructions where the plastic flow separates them in order to pass through them and then fostering them to come back together afterward. The injection molded part produced by plastic injection molding China has weld lines and your objective should be to design your part so that the weld lines occur at places where they don’t impact on part’s strength.

To Know more,visit : http://www.china-casting.biz/